WEATHER MONITORING EQUIPMENT

Light Meter Rain Gauges Data Logging Rain Gauges Snow Gauge Temperature Logger
Light Meter Rain Gauges Data Logging
Rain Gauges
Snow Gauge Temperature Loggers
Light Meter Rain Gauges
Weather Meter Wind Meter






























rain gauge
RAIN GAUGE:

The large 65 x 60 mm (2.5″ x 2.3″) opening and precision molded graduations on this wedge-shaped rain gauge permit measurement of 0.5 mm to 150 mm or 0.02″ to 6″ of rain. One-piece aluminum mounting bracket and fasteners are included for post or fence mounting.

#1048: Rain Gauge $15.95



rain gauge
PRECISION RAIN GAUGE:

This durable, clear acrylic rain gauge is 10″ long and tapered to fit a 6″ white plastic ground stake. Collection opening is 31 mm in diameter. Fasteners are also included for post or fence mounting. Measures rainfall 0.1″ to 5.5″ or 1.0 mm to 140 mm.

#1047: Precision Rain Gauge $19.50



rain gauge

ECONOMY RAIN GAUGE:

This rain gauge can accurately and easily determine the amount of precipitation fallen. Use it to monitor plant and garden irrigation and avoid over watering plants and flowers.
-Includes 120 mm / 5" rain gauge and 2.5 cm / 1" gauge for lawn watering
-Affix to post and/or in the ground

#2703: Economy Rain Gauge $10.50



rain guage

FORESTER'S RAIN GAUGE:

Aluminum rain gauge has a total capacity of 7" and measures to 0.01". Consists of a receiver, overflow cylinder, measuring cup and stick. USFS Specification No. 5100-451A. Order mounting support separately. 7-1/4" Diameter x 10" Height.

#89048: Forester's Rain Gauge $375.00
#89114: Suppport for Mounting on Post $87.00
#89049: Replacement Measuing Stick $48.00



logging rain guage

DATA LOGGING RAIN GAUGE:

This fully self-contained rain gauge utilizes a tipping-bucket rainfall collector and a HOBO® Pendant Event Data Logger to automatically record up to 160 inches of rainfall data with a 16,000-tip memory capacity. The nonvolatile EEPROM memory retains data even if the battery fails. Start date and time can be programmed by the user. A HOBO® Pendant Optic USB Base Station and HOBOware™ software (each sold separately) are required to connect the rain gauge to a computer for launch and readout. The rain gauge features a removable top for easy data offload, three mounting feet for setup on level surfaces (three screws included), and a side bracket for mast mounting (hose clamps included).

Specifications:
Housing: Aluminum with baked-on enamel finish. Stainless steel shaft and brass bearings. High-impact ABS plastic tipping bucket. Funnel: Anodized aluminum.
Operating temperature range: 32°F to 122°F (0°C to 50°C).
Storage temperature range: -4°F to 158°F (-20°C to 70°C).
Accuracy: 1% (up to 1" per hour).
Time accuracy: 1 minute per month at 77°F (25°C).
Rainfall resolution: English, 0.01"; Metric, 0.2mm.
Power: CR-2032 3V lithium battery.
Battery life: one year typical use.
Dimensions: 10"H x 6.5" diameter.

#RG3: Data Logging Rain Gauge $609.00
#BASE-U-1 HOBO® Pendant Optic USB Base $99.00
#U-DTW-1 HOBO® Waterproof Shuttle $349.00
#BHW-PRO-CD HOBOware® Pro Software $139.00



snow guage

SNOW GAUGE:

Accurately measures fallen snow depths up to 30". Permanently marked, large, white 1/2" graduations on a green background are designed for reading from a distance. Gauge self-adjusts by sliding down the legs to allow for accurate measuring no matter how far the supports are positioned in the ground. Spring steel legs are designed to withstand blizzard-force winds. Weather-resistant corrugated plastic gauge provides years of trouble-free use. Made in the U.S.A. Dimensions: 42" x 4" x 1/8".

#88984: Snow Gauge $13.25



light meter

Extech® EasyView Light Meter:

This compact meter features a large, easy-to-read display with bar graph. Measures foot candles up to 40,000 in four ranges and up to 400,000 lux in five ranges. The meter utilizes a precision silicon photodiode sensor and features a 5' coiled cable for easy storage. Other features include min/max function, cosine and color corrected measurements, peak hold, data hold, auto power-off, and indicators for low battery and overrange. Built-in stand, remote sensor with protective cover, protective holster, and 6 AAA batteries included.

Specifications:
Range: Lux, 40, 400, 4,000, 40,000, 400,000; Foot candle, 40, 400, 4,000, 40,000.
Resolution:: 0.01.
Basic accuracy:: 3% rdg + 5 digits.
Dimensions:: 5.9" x 2.8" x 1.4".

#92500: Light Meter $275.00



wind meter

Kestrel® 2000 Pocket Wind Meter Plus:

Tracks maximum and average wind speeds along with current readings plus displays wind speed in your choice of knots, meters per second, kilometers per second, kilometers per hour, miles per hour, feet per minute or Beaufort scale. Temperature and wind chill can be displayed in °C or °F. Capable of measuring the slightest breeze, the unit uses an ultralight impeller mounted on jewel bearings to measure wind speed and provide an accuracy of 3%. For temperature readings, the Kestrel uses a fast-responding, hermetically sealed thermistor accurate to 1°F (1°C). Wind chill factor is calculated automatically from wind and temperature data using the U.S. National Weather Service's official tables. Measuring modes and display units can be changed at any time. Results are displayed on a large, easy-to-read backlit LCD which automatically shuts off 45 minutes after last key press. The Kestrel 2000 is housed in a reinforced fiberglass ergonomic case which is waterproof and floats. A convenient neck lanyard and one CR2032 battery are included. Five-year manufacturer's warranty.

Specifications:
Minimum wind speed: 0.7 mph (0.6 knots, 1 km/h, 0.3 m/s, or 60 fpm).
Maximum wind speed: 89 mph (78 knots, 144 km/h, 40 m/s, or 7,830 fpm).
Wind speed accuracy: 3%. Update: 1 second.
Temperature and wind chill accuracy: 1°C.
Temperature resolution: 0.1°C.
Wind chill factor resolution: 0.1°F (0.1°C).
Operating temperature: -4°F to +140°F (-20°C to +60°C).
Temperature range: -20°F to +158°F (-29°C to +70°C).
Temperature sensor: hermetically sealed precision thermistor.
Sealing: electronics enclosure IP67 - water resistant to 3 ft. Floats.
Battery: user-replaceable CR2032 coin cell battery (included) with a typical life of 400 hours.
Dimensions: 4.8" x 1.7" x 0.6".

#KES2000: Wind Meter Plus Meter $136.00
#KES-CASE: Optional Case $23.00
#89181: Replacement Impeller $23.00



wind meter

Kestrel® 3000 Pocket Weather Station:

Tracks maximum and average wind speeds along with current readings. Displays wind speed in knots, meters per second, kilometers per hour, miles per hour, feet per minute or Beaufort force. Temperature, wind chill, heat index and dew point temperature can be displayed in °C or °F. Relative humidity is expressed as a percentage. Measuring modes and display units can be changed at any time and all functions are controlled with two buttons. A hard, slip-on ergonomic case protects the display, buttons and impeller. 5-year manufacturer's warranty.

Specifications:
Minimum wind speed: 0.7 mph (0.6 knots, 1 km/h, 0.3 m/s, or 60 fpm).
Maximum wind speed: 89 mph (78 knots, 144 km/h, 40 m/s, or 7,830 fpm).
Wind speed accuracy: 3%. Update: 1 second.
Temperature and wind chill accuracy: 1°C.
Temperature resolution: 0.1°C.
Heat index accuracy: 3°C. Humidity sensor can be recalibrated in the field.
Wind chill factor resolution: 1°C.
Relative humidity accuracy: 3% from 5% to 95%.
Dew point temperature accuracy: 2°C.
Operating temperature: -4°F to +140°F (-20°C to +60°C).
Temperature range: -20°F to +158°F (-29°C to +70°C).
Impeller: 1" diameter, sapphire bearings, light weight.
Temperature sensor: hermetically sealed precision thermistor.
Humidity sensor: silicon based capacitive sensor.
Display: reflective 3-1/2 digit backlit LCD.
Sealing: electronics enclosure IP67 - water resistant to 3 ft. Floats.
Battery: user-replaceable CR2032 coin cell battery (included) with a typical life of 400 hours.
Dimensions: 4.8" x 1.7" x 0.6".

#KES3000: Wind Pocket Weather Station $215.00
#KES-CASE: Optional Case $23.00
#89181: Replacement Impeller $23.00