WATER SAMPLERS

• Aquascope
• Calibrated Line
• Economy Water Sampler
• Horizontal Alpha Water Sampler
• Kemmerer Water Sampler
• LaMotte D.O. Water Samplers
• LaMotte Water Sampler
• Messengers
• Non-Metallic Kemmerer Water Sampler
• Vertical Alpha Water Sampler

aquascope
AQUA SCOPE II™ UNDER WATER VIEWER:

Use this 26" viewer to view secchi disc readings and observe aquatic plant and animal life. Innovative design eliminates surface glare and internal reflection. Consistent viewing parameters, regardless of environmental conditions, are possible with this units black interior, flotation collar, neoprene viewing mask, and handle. Constructed of crush-resistant tube.

#US26: Aquascope II $129.00
ALPHA™ WATER SAMPLERS:

• Blue seals of durable, flexible, high-grade polyurethane resin with attached safety line
• Foolproof 316 SS trip head for durability
• Not suitable for chemical sampling
• Kits include bottle, plastic carry case, 45-B10 messenger & 62-C15 line (100 ft.)
• Single bottles & bottles with cases available
• Horizontal or vertical orientations available.

These popular and versatile bottles come in your choice of transparent acrylic or opaque PVC. PVC is more durable and less costly, but the acrylic allows you to view the bottle contents immediately. Alpha samplers are not suitable for chemical analysis of contents due to the potential for contamination (i.e. by mercury and phosphorus) by the materials in the sampler's construction. For chemical analysis, inquire about the Beta or suggested Kemmerer water samplers. This sampler requires a messenger and line (not included, except in kits) for operation. A thermometer can be mounted inside acrylic Alpha™ bottles.

alpha sampler
HORIZONTAL ALPHA WATER SAMPLERS:

Intended for shallow or deep waters, these bottles are called horizontal because they descend, parallel to the bottom. They are pulled sideways just before closing by the operator. This ensures a representative water sample for that specific depth. They are ideal for sampling at the thermocline, at other stratification levels, or just above the bottom sediments.

Part# Name Size Material Price
1120-G42 Sampler Kit 2.2 L Transparent Acrylic $720.00
1120-G45 Sampler Only 2.2 L Transparent Acrylic $534.00
1120-H42 Sampler Kit 2.2 L Opaque PVC $671.00
1120-H45 Sampler Only 2.2 L Opaque PVC $491.00
1130-G42 Sampler Kit 3.2 L Transparent Acrylic $802.00
1130-G45 Sampler Only 3.2 L Transparent Acrylic $586.00
1130-H42 Sampler Kit 3.2 L Opaque PVC $767.00
1130-H45 Sampler Only 3.2 L Opaque PVC $551.00
alpha sampler
VERTICAL ALPHA WATER SAMPLERS:

Larger bottles are especially good for collecting small plankton. The wide mouth collects a true water sample with no contamination from other water levels. During descent, the open mouth does not restrict water flow. This makes them particularly suitable for collecting plankton, floating sediments and for use where metallic ion avoidance is desirable.

Part# Name Size Material Price
1120-C42 Sampler Kit 2.2 L Transparent Acrylic $779.00
1120-C45 Sampler Only 2.2 L Transparent Acrylic $599.00
1120-D42 Sampler Kit 2.2 L Opaque PVC $719.00
1120-D45 Sampler Only 2.2 L Opaque PVC $551.00
1130-C42 Sampler Kit 3.2 L Transparent Acrylic $862.00
1130-C45 Sampler Only 3.2 L Transparent Acrylic $646.00
1130-D42 Sampler Kit 3.2 L Opaque PVC $814.00
1130-D45 Sampler Only 3.2 L Opaque PVC $599.00
kemmerer
KEMMERER™ WATER SAMPLERS:

All are available corrosion-resistant stainless steel, and the 1.2L size is also available in transparent acrylic plastic which allows viewing your sample before removing it. Seals are soft blue polyurethane (not autoclavable) and will leach mercury and potential other contaminants in trace amounts. Metal parts are 316 or 304 stainless steel except fasteners and plastic-coated cables of 18-8 steel. These types of Kemmerer samplers are not suitable for chemical analysis of contents due to the potential for contamination (i.e. by mercury and phosphorus) by the materials in the sampler's construction. For chemical analysis, inquire about the Beta or suggested Kemmerer water samplers. This sampler requires a messenger and line (not included, except in kits) for operation. A thermometer can be mounted inside the acrylic Kemmerer™ bottle (1200-C12 or 1200-C15).

Part# Name Size Material Price
1200-C12 Sampler Kit 1.2 L Transparent Acrylic $826.00
1200-C15 Sampler Only 1.2 L Transparent Acrylic $659.00
1200-E32 Sampler Kit 1.2 L Stainless Steel $851.00
1200-E35 Sampler Only 1.2 L Stainless Steel $706.00
1220-E32 Sampler Kit 2.2 L Stainless Steel $958.00
1220-E35 Sampler Only 2.2 L Stainless Steel $815.00
1230-E32 Sampler Kit 3.2 L Stainless Steel $1030.00
1230-E35 Sampler Only 3.2 L Stainless Steel $850.00
1240-E32 Sampler Kit 4.2 L Stainless Steel $1294.00
kemmerer
NON-METALLIC KEMMERER™ SAMPLERS:

• All plastic construction
• Clear acrylic or opaque PVC bottle body
• PVC center shaft
• No metal parts to touch your sample
• Silicone seals for trace metal sampling
• Large range of sizes - 1.2 to 8.2 L

This series of Kemmerer bottles has no metal parts to contact your sample. Delrin fasteners and an O-ring replace the stainless steel garter spring in the All-Angle™ trip head. The bottle body can be either transparent acrylic, which allows you to view your sample before removal, or opaque PVC for greater durability. The all-plastic center shaft is made of plastic CPVC with a plastic delrin nut on its bottom.

Designed for trace metal sampling due to silicone seals. (Polyurethane, although affordable and durable, is not suitable for trace metal sampling because it leaches mercury and other contaminants). Also may be used for organic sampling to concentrations of mg/L. When running metal, organic, or any other chemical analyses, it is best to run a blank on the sampler prior to use. The end seals mount like a tire on a hub and are easy to replace. The end seals should not be sealed, seated, or fully closed during storage. Although made of tough elastomers, they have a tendency to take a set during long periods of inactivity and stress. For this reason, store your Kemmerer with the seals slightly open and not touching the bottle body. This sampler requires a messenger and line (not included, except in kits) for operation. A thermometer can be mounted inside acrylic Kemmerer bottles.

Part# Name Size Material Price
1510-C22 Sampler Kit 1.2 L Transparent Acrylic $815.00
1510-C25 Sampler Only 1.2 L Transparent Acrylic $670.00
1510-D22 Sampler Kit 1.2 L Opaque PVC $779.00
1510-D25 Sampler Only 1.2 L Opaque PVC $622.00
1520-C22 Sampler Kit 2.2 L Transparent Acrylic $874.00
1520-C25 Sampler Only 2.2 L Transparent Acrylic $730.00
1540-C22 Sampler Kit 4.2 L Transparent Acrylic $982.00
messengers
MESSENGERS:

Stainless steel messengers are weights that slide down a line, strike a pad, and cause a sampler to open or close. Split messengers can slip on or off the line anywhere. Solid messengers are threaded on the line at the end.

#SBK2: Split Messenger $93.00
#SBK3: Solid Messenger $64.00
calibrated line
CALIBRATED LINE & WEIGHT:

This 20 meter, braided, stretch-resistant line has a brass spring clip for easy attachment to samplers, secchi discs, plankton nets or sounding leads. The line wraps conveniently around an ethafoam block which prevents accidental loss.

#1065: 20 Meter Calibrated Line $44.00
#1065-G: 20 Meter Line with Weight $46.00
#1068: Sounding Weight Only $19.50
lamotte sampler
LAMOTTE WATER SAMPLER (MODEL: JT-1)

This one liter sampler of clear acrylic is furnished with a 20 meter calibrated line and a lead collar which assures rapid descent and minimal drift. A brass messenger triggers a release mechanism to seal the sample chamber with two fitted rubber plungers at the desired sampling depth. The built-in side outlet and flexible tube allows for removal of the water sample.

#1077: 1 Liter Water Sampler (JT-1) $279.00
#0169: Replacement Sampler Body $129.00
#1077-MSGR: Replacement Messenger $44.00
#1111: Replacement Bulb Assembly $58.50
#1112: Replacement Latex Tubes and Clips $7.50
#1065: 20 Meter Calibrated Line $44.00
economy sampler
ECONOMY WATER SAMPLER:

This basic water sampler has an impact-resistant, PVC body of 1.75 liters and soft rubber seals. It is designed for collecting water samples for chemical and biological analysis. The simple trip mechanism requires no messenger, simply jerk on the line and the sampler closes. Sampling line sold separately.

#W78305: Economy Water Sampler $149.00
D.O. Sampler
LaMOTTE DISSOLVED OXYGEN WATER SAMPLER:

This simplified water sampler features a unique, easy to remove 60 ml collecting bottle which is specifically designed to work directly with the LaMotte dissolved oxygen test kit, eliminating sample transfer into second collecting bottle. Sample overflows the collecting bottle 5 times to insure greater representation. Employing a calibrated line allows you to retrieve samples at controlled depths. For rapid descent and minimal drift in low currents, attach a 2 lb weight sampler.

#1054-DO: LaMotte Water Sampler $129.00
D.O. Sampler
LaMOTTE DISSOLVED OXYGEN / TEMPERATURE SAMPLER:

Collects samples at specific depths. Ideal for collection of dissolved oxygen samples. When trip line is pulled, dissolved oxygen sample bottle will fill, overflow and flush more than three times to insure a representative sample. During retrieval, decreasing water pressure prevents exchange of air and water with sample. Excess water in sample chamber can be used for additional tests such as pH. Interior chamber accommodates an armored thermometer (not included) for accurate sample temperature readings. Accommodates the same sample bottle used in the LaMotte D.O. kit. Use with braided line and weight (not included).

#3-0026: Water Sampling Bottle $175.00