|
HANNA MULTI-PARAMETER METER:
Dissolved Oxygen, pH, pH/mV, Conductivity, Salinity, Temperature, ORP and More
GPS Multiparameter Meter with Fast Tracker™ Tag Identification System
HANNA's new HI 9828 multiparameter portable meter with GPS receiver monitors up to 13 different water quality parameters (6 measured,
7 calculated).
Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display.
GPS information can be transferred to a PC using HANNA's HI 929828 software. GPS information can also be viewed by GPS mapping software.
Clicking on visited locations using mappings oftware displays measurement information.
The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).
For measuring points within a 30 ft range or where GPS signals are not available, HI 9828's Fast Tracker™ is invaluable for associating
measurements with their locations.
HANNA's exclusive Fast Tracker™-Tag I.D.System monitors and records data using iButtonÆs that can be installed at any number of sampling sites.
The HI 9828 has a graphic, backlit display that automatically sizes the digits to fit the screen and allows full configuration of each
parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of
data via USB connection.
Each parameter is supported by on-screen context sensitive help, both in the calibration mode andduring measurement.
Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water).
The multi sensor probe can be left underwater(IP68 standard).
GPS (Global Positioning System) Enabled:
The new HI9828 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement
data. The GPS tracks your location using satellites to within 30 ft (10 m) so you can be sure that you return to the same location for repeated
measurements.
Basic GPS Features
* GPS coordinates shown on the LCD with up to 10 measurement parameters
* GPS signal strength shown on LCD
* Number of satellites shown on LCD
* Logged data is embedded with GPS coordinates
Advanced GPS Features<
* Users can associate GPS coordinates with alphanumeric locations
* Distances between current location and predefined locations are displayed arranged by distance
* Memorizes last location and time should signal be lost
HI 929828 PC Software
* Manages logged data from the HI 9828
* Displays GPS coordinates with logged data
* Automatically maps samples on your PC (internet connection required)
* Shows location points on map along with measurement data
* Display up to 12 parameters
* Track measurement locations with GPS
* Meter features IP67 and probe features IP68 waterproof protection
* Exclusive Fast TrackerTM - Tag ID System simplifies test logging
* Graphic LCD with backlight
* Built-in barometer for DO compensation
* Quick Calibration feature
* Measurement check eliminates any erroneous readings
* Auto recognition of pH and pH/ORP probe
* Logger function records the data of all connected sensors
* Log-on-demand and automatic logging (up to 60 000 samples)
* Can display logged data as graphs
* USB for PC connectivity
* Auto-range of EC and TDS readings
* GLP feature with the last 5 calibrations recorded
* All sensors are field replaceable
* Meter accepts both alkaline and rechargeable batteries
* Rugged probe with stainless steel tip has a diameter under 2" for wells and pipes
• HI9828 Multi-Parameter - Owners Manual
Order Information:
HI 9828 is supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperaure), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 WindowsÆ compatible software and instruction manual in a rugged carrying case.
| Range |
pH |
0.00 to 14.00 pH |
| Resolution |
pH |
0.01 pH |
| Accuracy |
pH |
±0.02 pH |
| Range |
mV |
±600.0 mV |
| Resolution |
mV |
0.1 mV |
| Accuracy |
mV |
±0.5 mV |
| Range |
mV |
±2000.0 mV |
| Resolution |
mV |
0.1 mV |
| Accuracy |
mV |
±1.0 mV |
| Range |
DO |
0.0 to 500.0%; 0.00 to 50.00 mg/L |
| Resolution |
DO |
0.1% / 0.01 mg/L |
| Accuracy |
DO |
0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading;
0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading |
| Range |
EC |
0.000 to 200.000 mS/cm (actual EC up to 400 mS/cm) |
| Resolution |
EC |
Manual: 1 uS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm
Automatic: 1 uS/cm from 0 to 9999 uS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm
Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm |
| Accuracy |
EC |
±1% of reading or ±1 uS/cm whichever is greater |
| Range |
Resistivity |
0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm |
| Resolution |
Resistivity |
Dependent on resistivity reading |
| Range |
TDS |
0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor) |
| Resolution |
TDS |
Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt)
Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt);
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) |
| Accuracy |
TDS |
±1% of reading or ±1 mg/L |
| Range |
Salinity |
0.00 to 70.00 PSU (extended Practical Salinity Scale) |
| Resolution |
Salinity |
0.01 PSU |
| Accuracy |
Salinity |
±2% of reading or 0.01 PSU whichever is greater |
| Range |
Seawater Specific Gravity |
0.0 to 50.0 σt, σ0, σ15 |
| Resolution |
Seawater Specific Gravity |
0.1 σt, σ0, σ15 |
| Accuracy |
Seawater Specific Gravity |
±1 σt, σ0, σ15 |
| Range |
Atm. Pressure |
450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa |
| Resolution |
Atm. Pressure |
0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa |
| Accuracy |
Atm. Pressure |
±3 mmHg within ±15°C from the temperature during calibration |
| Range |
Temperature |
-5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K |
| Resolution |
Temperature |
0.01°C; 0.01°F; 0.01K |
| Accuracy |
Temperature |
±0.15°C; ±0.27°F; ±0.15K |
| Calibration |
pH |
Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer |
| Calibration |
mV |
Automatic at 1 custom point |
| Calibration |
Conductivity, Salinity |
Automatic 1 point with 6 memorized standards (84 uS/cm, 1413 uS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
or custom point |
| Calibration |
DO |
Automatic 1 or 2 points at 0, 100% or 1 custom point |
| Calibration |
Resistivity, TDS |
Based on conductivity or salinity calibration |
| Calibration |
Atm. Pressure |
Automatic at 1 custom point |
| Calibration |
Temperature |
Automatic at 1 custom point |
| Temperature Compensation |
|
Automatic from -5 to 55°C (23 to 131°F) |
| Logging Memory |
|
Up to 60000 samples with 13 measurements each |
| Logging Interval |
|
1 second to 3 hours |
| PC Connection |
|
USB (with HI 92000 software) |
| Waterproof Protection |
|
Meter IP67, Probe IP68 |
| Environment |
|
0 to 50°C (32 to 122°F); RH 100% |
| Power Supply |
|
(4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight)/
(4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight) |
| Dimensions |
|
Meter: 221 x 115 x 55 mm (8.7 x 4.5 x 2.2"); Probe: 270 x 46 mm DIA (10.6 x 1.8" DIA) |
| Weight |
|
Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.) |
| HI9828/4-01 |
Multiparameter Meter Kit with 4m Cable |
$2400.00 |
| HI9828/10-01 |
Multiparameter Meter Kit with 10m Cable |
$2500.00 |
| HI9828/30-01 |
Multiparameter Meter Kit with 30m Cable |
$2700.00 |
| HI7040L |
Zero Oxygen Solution, 500 ml |
$20.00 |
| HI7042S |
D.O. Electroylte Solution, 30 ml |
$25.00 |
| HI7021L |
ORP Test Solution, 240 mV, 500 ml |
$29.00 |
| HI7022L |
ORP Test Solution, 470 mV, 500 ml |
$29.00 |
| HI7033L |
84 uS/cm Conductivity Solution, 500 ml |
$19.00 |
| HI7031L |
1413 uS/cm Conductivity Solution, 500 ml |
$19.00 |
| HI7030L |
12880 uS/cm Conductivity Solution, 500 ml |
$19.00 |
| HI7032L |
1382 ppm TDS Solution, 500 ml |
$19.00 |
| HI70300L |
Electrode Storage Solution, 500 ml |
$19.00 |
| HI7061L |
Electrode Cleaning Solution, 500 ml |
$19.00 |
|
